Someone to vacuum form and trim a couple simple parts

[Spiyda]

Matt,

the size will fit in my machine but it is near the limit length wise..
this may cause significant thinning at the ends..

also I only have 2.0 black smooth or 1.5 black pinseal in stock

Chris

Hi,

I'm looking for someone who would be able to vacuum form a couple of simple parts (each approximately 5 sides of a 406x206x63mm cuboid with draft angles) out of 3mm ABS (preferably white pinseal). In addition to trimming, one part also needs a a slot cutting out at one end - The parts are otherwise identical. The only critical dimensions are the first 2mm of the inside rims of the parts which need to be about +/- 0.25mm. I can supply STEP/IGES/STL files for the parts. Initially I only require 1 of each part, but there *might* be future business in it - Can't promise anything at this stage.

Delivery of parts within the UK.

Thanks,
Matt.