Aluminium Tooling Sheet - Various sizes

[D.C.]

How thick is the 450x450, do you have 3 or 4 sheets and how many holes do they have in?

Ta.

PS and would it be possible to view/collect at the weekend?

[Fewco]

Hi,

I've just checked our stock and a chap has just been it to pick up our few larger sheets! We're now down to quite a few sheets around the 300 x 300 x 13mm mark. (rough size as each piece has been used for a different size tool, although most are 13mm thick)

If these are still of interest I can put a few aside for you, however there won't be anyone around this weekend unfortunately (can be arranged for a weekend at a later date however)

As for holes, again they vary from 2-4 holes up to around 15-20 depending on the sheet (we have a whole pallet of them so I can't see every sheet at the minute.)

You would be more than welcome to come and have a look through the stock if that is preferable.

Cheers