. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 10-11-2014 #28
    IN-WondeR's Avatar
    Lives in Randers, Denmark.
    IN-WondeR
    Last Activity: 29-08-2018 Has been a member for 9-10 years. Has a total post count of 38.
    There's very little vibration in it. Especially after I added the 41mm MDF top to it. 22+19mm MDF.
    Plus I added extra stiffness on the crossmembers with 60x60x4mm steel tube.

    I have done a cut test in Aluminum, with a rather agressive cutting parameter, and it came out lke this, with a single flute cutter. You need to look at the area within the red rectangle.
    The cut was done rather agressively, and with a 3mm single flute cutter at high RPM. Will go for a slower RPM next time I try it. It looks bad looking at the picture, but the cut is actually very flat and smooth.
    Attached Thumbnails Attached Thumbnails Click image for larger version.  Name: 2014-09-06 21.15.58.jpg  Views: 283  Size: 192.9 KB  ID: 13827  
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. New member looking for advice on a good quality machine (brand)
    By steve78 in forum Marketplace Discussion
    Replies: 1
    Last Post: 16-08-2014, 09:25 PM
  2. Desktop size build to learn on - PCB routing / small MDF work.
    By dynamis_dk in forum Gantry/Router Machines & Building
    Replies: 10
    Last Post: 26-02-2014, 11:50 PM
  3. NEW MEMBER: Brand new newbie
    By Grit monkey in forum New Member Introductions
    Replies: 19
    Last Post: 09-10-2013, 10:09 PM
  4. Stepper shaft size and pulley bore size problem
    By psiron in forum Linear & Rotary Motion
    Replies: 13
    Last Post: 15-06-2010, 04:11 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules