. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 10-11-2014 #1
    EddyCurrent's Avatar
    Lives in UK, United Kingdom.
    EddyCurrent
    Last Activity: 29-06-2025 Forum Superstar, has done so much to help others, they deserve a medal. Has a total post count of 2,203. Received thanks 278 times, giving thanks to others 110 times. Is a beta tester for Machinists Network features.
    I once looked deeply into making loudspeaker cabinets (big ones) and it was deemed a good idea to use a glued sandwich of MDF and plywood to reduce cabinet resonance.
    Last edited by EddyCurrent; 10-11-2014 at 10:22 AM.
    Spelling mistakes are not intentional, I only seem to see them some time after I've posted
    Reply With Quote Reply With Quote
  2. 10-11-2014 #2
    IN-WondeR's Avatar
    Lives in Randers, Denmark.
    IN-WondeR
    Last Activity: 29-08-2018 Has been a member for 9-10 years. Has a total post count of 38.
    Laminating sheets is always a good thing, it does remove alot of resonanse and vibrations all together... I had hopes to find another 40mm bottom sheet this time, but sadly I did not find one for cheap this time around.
    But the overall look of the machine and the precision is more than ok for my uses. Which mainly will be woods and plastics, and perhaps a bit of aluminum.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. New member looking for advice on a good quality machine (brand)
    By steve78 in forum Marketplace Discussion
    Replies: 1
    Last Post: 16-08-2014, 09:25 PM
  2. Desktop size build to learn on - PCB routing / small MDF work.
    By dynamis_dk in forum Gantry/Router Machines & Building
    Replies: 10
    Last Post: 26-02-2014, 11:50 PM
  3. NEW MEMBER: Brand new newbie
    By Grit monkey in forum New Member Introductions
    Replies: 19
    Last Post: 09-10-2013, 10:09 PM
  4. Stepper shaft size and pulley bore size problem
    By psiron in forum Linear & Rotary Motion
    Replies: 13
    Last Post: 15-06-2010, 04:11 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules