Mould polishing and texture advice

[dazza]

Hi deisel, be careful creating a texture in a mould. It can cause the resin to lock in to the mould. On release you'd either leave bits of resin behind or possibly damage the mould.

Thanks for the info r0b,probably saved me a few quid right there!
The texture i was thinking of is the grippy eggshell like texture found on phones,remotes ect so nothing heavy , i will have to do a sacraficial mould maybe with the parts shrinkage when cooled i might get away with it.


Yes for injection molding jonathan,there sometimes referred to as resin pellets used,