Renovating a Hardinge HLV-H

[BillTodd]

WOW, this is coming along very nicly mate,

Thanks Lee :)

i did look at your other post and wonder if you would be doing the tray as well. Makes sense while your there huh.

There is a degree of madness in my method - I primed the tray last so as not to bash it about while preparing the head for spraying.

Is that really the same unit (compound slide) ? what did you use to get it up so well it looks so much better.

Mostly a soft wire brush, wd40 and a 'scotch-brite' buffing wheel from RDG plus the lashings of elbow grease. :)