1250 x 1250 cnc router (from scratch)

[Danielroyal25]

Thanks Paulro,
X & Y both have 1250mm travel so will cut a full 4x4 sheet allowing 15mm a side. Just make sure that you allow for the width of the z axis, so that when the z is at either extreme of its travel it passes the board to make full use of the sheet and allow a little extra so that the z axis doesnt max out on its travel.
i think i left 150mm between the collet and top of the bed, i should have made the bed height adjustable really, but maybe next time....
i will try and get some vids up soon, i have been tweaking it lately and trial cutting projects so once it is all ok i will post some videos. let me know if you need any more info, all the best!