. .
  1. #1
    Hi Everyone,

    Just thought I would share my build with everyone. This is my first attempt at a CNC router.

    I am currently at a little bit of a sticking point when it comes to ball screws! I managed to pick up some UNMACHINED! ball screws and nuts off the bay with little idea of how challenging it would be to get them machined.

    If anyone could recommend a cost effective way of getting two 16mm ball screws machined in the Midlands area I greatly appreciate it! If not I will have to bite the bullet and buy a couple pre-machined.

    This is how it looks at the minute!

    Click image for larger version. 

Name:	IMG_0598.JPG 
Views:	434 
Size:	52.8 KB 
ID:	8089

    Look forward to hearing your thoughts.


  2. #2
    Profiled linear rails and ball-screws and your using MDF for a Frame.? . . . Crazy MADNESS.!!

    Take them to your local technical collage and ask them if they need some practice.!!

  3. #3
    That's not such a bad idea :)

    I was lucky enough to get the one ballscrew and all the linear rails for free as well as a sheet of nice plywood, so technically not mdf :) I have doubled up 18mm birch faced ply why I was hoping would suffice for V1.

    The plan is to replace with Ali once it's working to an extent.

  4. #4
    Im sure it must of taken a lot of hard work, so fair play to you sir.

    It may be made of wood, but atleast you've made a start.. If you do eventually get round to replacing with ali... atleast you will have a machine to make the new one with :D

    top work, and keep us posted with updates.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. RFQ: Does anyone want to build me a cnc router?
    By totally useless in forum Projects, Jobs & Requests
    Replies: 31
    Last Post: 08-05-2014, 09:55 PM
  2. Does anyone want to build me a cnc router?
    By totally useless in forum Open Source Designs & Plans
    Replies: 25
    Last Post: 05-05-2014, 12:44 AM
  3. How Not To Build A Router
    By Clive S in forum Gantry/Router Machines & Building
    Replies: 15
    Last Post: 17-11-2013, 10:09 AM
  4. BUILD LOG: CNC Router New Build
    By PilotTom in forum DIY Router Build Logs
    Replies: 12
    Last Post: 25-05-2013, 03:49 PM
  5. BUILD LOG: A3 Router Build
    By GTJim in forum DIY Router Build Logs
    Replies: 6
    Last Post: 17-02-2012, 12:53 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts