Thread: Stepper motors - problem
Hybrid View
-
07-02-2013 #1
Last Activity: 19-01-2024
Need more info.?
What drives. Give settings.
What BOB.
What you Changed from before.?
-
08-02-2013 #2
Last Activity: 09-02-2025
BOB ; www.easy-cnc.com * Your best option in driver boards for CNC machines
Originally Posted by JAZZCNC
Drivers ; A3977
Things that have changed from before. X axis Nothing except new cutting table. Y axis longer belt same pitch. motors act the same without belts mounted.
Motor tuning settings in Mach3 that have worked fine for all 3 motors until now ;
Steps Per 535
Velocity 199.98
Acceleration 10
Step pulse/Dir Pulse 0
Swedish Storbro Luna - 3 axis CNC mIll - 250 - 2500rpm / 1.1 tonne
3 axis CNC/router / Alu profile frame....25mm Alu Cutting bed X=500mm Y=300mm Z=110mm.....Supported 25mm X rails ....Supported 20mm Y rails....Supported 20mm Z rails.....2.2kw Chinese WC spindle..... CSLAB CSMIO/IP-M 4-axis Ethernet Motion Controller....M542 Drivers..SY60STH86-3008BF Motors...running....Mach3 / Cambam / Emachineshop.
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
FOR SALE: Stepper motors & more for sale
By andrewbond in forum Items For SaleReplies: 9Last Post: 17-08-2012, 01:25 PM -
Help with Stepper Motors
By Scott in forum Stepper & Servo MotorsReplies: 8Last Post: 04-04-2010, 02:35 PM -
rs stepper motors
By chaz@2b in forum Stepper & Servo MotorsReplies: 19Last Post: 06-08-2009, 11:05 PM -
Motors and Board? Problem.
By m.marino in forum General ElectronicsReplies: 7Last Post: 17-04-2009, 10:47 AM
Bookmarks