Home Switches & Slave Axis in Mach 3

[JAZZCNC]

Hi,

I have today finally breathed some life into my router and too are looking to home the Y Axis (2 x Stepper + 2 x Proximity Switches). A few things that I would like some help on please. Are there only certain buttons that the script can be changed? What are the script changes mentioned above actually doing? Would the script changes mean that I wouldn't be able to use the individual Reference axis buttons on the Diagnostic page? The Ref All Home button on my Mach3 doesn't match the quoted scipt above. It is as below. Any reason for this and does it matter?

DoButton( 24 )
DoButton( 23 )
DoButton( 22 )
DoButton( 25 )

DoOEMButton(133)
DoOEMButton(134)
DoOEMButton(135)

I am a little scared that a wrong setting could potentially damage my machine during the homing process and therefore I want to learn what these changes and settings are actually doing so that I am better able understand my machine and in the future hopefully help others. Regards Simon

That will be fine.
The first 4 commands home the Z,Y,X,A in that order and the other 3 would Zero X,Y,Z encoders if they where connected.