x4pcs 18mm Marine Ply Disc's - Ruff & Ready @ 390mm OD

**Jonathan** · 01-03-2013

Originally Posted by WandrinAndy

Are you refering to Lee or Geoffrey?

Leeeeeeeee

**Lee Roberts** · 02-03-2013

Originally Posted by Philly

Looks good, but its march now, take down your xmas lights

Guilty Sir!, only took the ones on front of house down a week ago. Couldnt do it with the snow and so on

, we are leaving the stars up tho as they are nice when entertaining of an evening, we dont have smoking in the house so people tend to congregate at the back down, another reason for the "lean to" being born - that and the need for me to work with a chop saw this spring...more on that later!

Originally Posted by Jonathan

Now you just need to finish your router...it's been a while since we heard anything about it!

Hehe, like i dont know that!, before i can build it i need a place for it to live - enter the 24x10ft workshop build'ing log coming late spring time!

.Me

**sportage** · 03-03-2013

Morning Lee,
Look really good. Would you be able to advise where you got these cut in Ply. Looking for some ply cutting myself.
Thanks

Originally Posted by Lee Roberts

Hi guys,

I need 4 ply disks cut please, below is the pic of the unit they will become part of. Plan is to paint it white, add the disks to act as shelves, stain and seal - Job done. As you can see i've built a "lean to" down the side of my house so it will be out of the rain but would like marine ply if possible but i guess something like far eastern would do.

Will then pop some garden ornaments on them with some small plants/pots for decoration, picked it up of the local scrap man as he was about to "way it in" £5, think it would look nice once dressed up

.

Finish dosnt matter to much as i can sand them down and so on, just after the circles/disks really, i can arrange postage via citylink for around £10 if you would prefer that. If you have the facility to put a "round over" on one of the outside edges that would be appreciated but not a must.

Poped a drawing in for you to work from as well :)

Quote me happy guys.

.Me

**Lee Roberts** · 03-03-2013

Originally Posted by sportage

Morning Lee,
Look really good. Would you be able to advise where you got these cut in Ply. Looking for some ply cutting myself.
Thanks

Hi,

I got them from placing an ad in the Projects, Jobs & Requests forum :)

There are lots of members here who will be willing to freelance for you, just post your request and watch the magic as offers come in :).

.Me

**Lee Roberts** · 29-03-2013

Just a quick update on this...

Managed to get some stain on the disks and the frame primed, went for some georgian medium oak stain and have a small drum of johnstones hard wearing wood floor sealer ready to go next.