Hybrid View
-
03-03-2013 #1
I've added a few bits to the OP, including some suggested amendments to the VFD settings. I will be posting more on that subject soon as there may be a way of getting more torque from the spindle at low speed.
Last edited by Jonathan; 03-03-2013 at 01:26 AM.
-
25-03-2013 #2
I searched for these spindles and now I'm so confused...
solar.jean states on a few of his listings "FOUR BEARING"; first written only on the listing image for a spindle alone with "Japanese Imported Bearing" and second only in the listing title for the £252 spindle+VFD with "Germany Imported Bearing"
As I buy the ballscrews from linearmotionbearings2008 I saw that he also sells spindles which are far more expensive (£353). As I asked him if he can justify the higher price, he only made a "best special price" which is still £36 higher. The only important difference in the description is that he claim to professionally test them before shipping.
Now my dilemma comes from the fact that he already sold 54 of them at this very high price. And 54 are a lot!
I even read somewhere on the forums that the German bearings are actually made by a Chinese company named "German" and the Japanese ones are top brands but that specific model number is supplied only to China.
-
25-03-2013 #3
I'd buy from Chi. He's consistent and a decent chap. If things go wrong he usually fixes it. Solar Jean has been known to disappear off the face of the earth if you email with questions and especially if you want to claim on the warranty.
-
25-03-2013 #4
Both have only few negative and neutral feedback, and solar.jean mostly for $1 "Nail Art 3D Sticker" lol
Yes, I know Chai is way more consistent and professional. I read a lot of good things about him. Could this be the only reason for selling a lot of spindles at 40% higher price?
-
25-03-2013 #5
The other reason is someone called JazzCNC keeps advising people to buy them from him. My opinion is just get the cheapest one since the differences between them, if you can even tell a difference, are bound to be negligible and I know plenty of people who've bought from other sellers and haven't reported problems. Mine, which was the cheapest I could find at the time, was from solar.jean and it turns out it has Chinese bearings, but they are marked as a match pair so that's pretty good. It also has 4 bearings not 3. He probably sells all sorts though, so don't expect that to mean you'll get one the same.
-
25-03-2013 #6
This Chinese spindle thing is an expensive lottery (for me at least). If you get a spindle manufactured on Friday or during a football game you may have the AC bearings put in the same direction not face to face or even fewer as designed...
-
25-03-2013 #7
-
25-03-2013 #8
Think you'll find Solar Jean sells crap spindles as well as good one's. Its pot luck. Loads of complaints about that seller on CNCZone never heard anyone complaining about the one's chai sells. I think Jazz does right recommending Chai to folks since they've got enough headaches with the logistics of DIY CNC.
Didn't Solar Jean steal money off you Jonathan when you bought those drives and never got them?
-
21-04-2016 #9
Jazz previously suggested upgrading the coolant fittings on these spindles for some push fit/lock type, I like this idea so here is a link to some on eBay:
High Pressure Metal Push-in Fittings for Air or Central Lubrication Systems Tube
http://m.ebay.co.uk/itm/271182576634
You want the M8x1 fine thread option for the correct fit, dose/maybe the OP wants to add this info to the first post.
EDIT: Better prices and info can be found here:
http://www.mycncuk.com/threads/9452-...g?goto=newpost
.MeLast edited by Lee Roberts; 22-04-2016 at 01:49 PM.
.Me
-
29-04-2016 #10
OK, guys so before I start plugging in wires is this diagram right?
I want to be able to start the spindle and control the RPM from the EDINGCNC Software
Link to the board manual in case needed http://www.edingcnc.com/upload/files/cpu5a_flyer_tech.pdf
Thread Information
Users Browsing this Thread
There are currently 8 users browsing this thread. (0 members and 8 guests)
Similar Threads
-
Chinese Spindles
By Ricardoco in forum Generic Chinese SpindlesReplies: 123Last Post: 05-12-2016, 12:16 AM -
Info on Chinese suppliers, their reliability and reputation
By Want2build1 in forum Marketplace DiscussionReplies: 38Last Post: 07-12-2013, 09:37 PM -
NEW MEMBER: Seeking advice on a CNC setup for (one off) machining carbon fiber plate
By Tomcat in forum New Member IntroductionsReplies: 0Last Post: 03-03-2013, 01:43 PM -
Chinese spindles
By Colin Barron in forum Marketplace DiscussionReplies: 15Last Post: 23-08-2011, 08:58 PM -
Chinese 1.5kw Spindles
By jcb121 in forum Generic Chinese SpindlesReplies: 12Last Post: 28-07-2011, 06:20 PM
Bookmarks