The 2.2Kw Chinese Spindles - Info, Setup and Advice + More

[John S]

Yes just checked and not 1/8" gas which is what i expected, so sorry . can't help.

[davethefixer]

yeah the guy in my local pnuematic supplier couldnt find anything off the shelf. its nearly M8 but not quite.
as Jonathan says its probably "M8 fine" but as i do not have any thread gauges so i carnt be sure.
i dont have a lathe that will do screw threading bit if it comes to it i will have take it apart and drill it out and re tap it 1/8 BSP.

[Swarfing]

Some of these have NPT fittings

[John S]

Mine looks to be M8 or around there.
How many fittings do you want, got a few 2.2Kw spindles here that I'm not using at present and i can rob them to get you out the sheeite

[Jonathan]

Just checked the two I have - they're both M8x1.0.

[Swarfing]

The one i have is M8x1.0 also

[davethefixer]

thanks guys i only need one to replace the one that snapped off.
I would be most greatful to accept one from any of you. ( i'll let you fight it out amounst yourselves )
i assume you can PM me for details ( i can send a self addressed and paid for jiffy bag )