Help with new machine

[grace chen]

Hello,

I am new to the forum.

We are an industrial design company specialising in the design and development of motorcycles and power sports vehicles. We regularly make full scale Prototype models from auto styling clay, model board (Ureol) mdf, sla sls etc

We are looking to purchase a CNC router for cutting model board, styrofoam, wood, MDF and perhaps plastic. Primarily we want to cut female tools from Polyurethane model board (Renishape, Ureol etc) so that we can make GRP and Carbon parts. We have a fair bit of work coming up that will mean we will need to cut GRP female mould tools from Ureol model board or mdf. We could farm it out but the amount we will need to do means we could be better off investing in our own machine. Don't really have a budget as yet but would ideally be looking to spend no more than say 12k. I'm guessing a 4ft x 4ft by say 400mm would do for the sort of work we will be doing (mostly bike panels). As well as creating female mould tools for GRP parts we will also cut model parts for things like engine casings or headlight reflectors. Obviously we could make tools in sections and dowel and pin them together so make parts that are larger than the bed size.

I am looking for any help or advice that you can offer.

Many thanks in advance
Mark

Hello mark

We are manufacturer of cnc routers in China. For your requirements,here are two kinds of cnc routers for your choice.

One with below specification(picture attached)

working size:1300*2500*400mm
servo motors and drivers
DSP handle /NC studio control system
table facet:vacuum suction or T-slot

And the other is professional mould making cnc router,which Z axis height can be highed up to 600mm.

If you are interested,please feel free to contact with me at [email protected].

More details and pictures will be sent to you.

Regards.
grace