Thread: new machine too noisy
-
16-02-2009 #1
Anyone know of a "quiet" wood router.
At the moment I have a standard cheap 1000w plunge router which makes a racket.
I dont have a garage and at the moment am doing the test runs in the house.
Either I need to find a cheap quiet router or figure out how to make a soundproof box.
Also anyone have either a kress 1050 or fme 800? How noisy are these?
-
16-02-2009 #2
I use a Kress 850 and if you keep it under the 2 mark it's not bad at all.
When run flat out it's just like any other router.
2 is equal to about 12,000 rpm
If you want to ring me during a working day I can switch it on and you can listen to it.
John S.
-
16-02-2009 #3
-
17-02-2009 #4
Yup i'v got 2 of the FERM FBF-6E and they are ok at low speeds. Can pick them up cheap to, have a look at this post: Here
.Me
-
17-02-2009 #5
-
17-02-2009 #6
Thats because i'v been buying them all up ! :D
No i dont think so, i would say at 8k Rev they are about as noisy as a woman's hair dryer on full, it would be hard to record the sound on a phone or video and i would say its probly still to noisy for you to use in the house unless you have good distance from room to room..Me
-
17-02-2009 #7
What I like about the size of the t4 is that I would be able to make a smaller cnc as at the moment im losing too much width from my y axis due to the plunge router (8 inch).
The t4 only needs a 43mm collar? If I can find a t3 or ferm I will buy one but iot looks like the t4 new is my best bet at only £63. Thanks for the advice. Id love a krell but they seem to be around £140 delivered.
-
17-02-2009 #8
So i can use them on my machines? :confused: :p if you look at my other post here you can read why.
.Me
-
17-02-2009 #9
-
17-02-2009 #10
No no, future machines as the builds have already been started.
No not seen the sparky, equivalent you say ?.Me
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
LIMAC knife cutting machine and plasma machine, cnc router latest video
By therouterlady in forum Manufacturer NewsReplies: 0Last Post: 18-09-2013, 05:28 AM -
How noisy the spindle motor?
By templecorran in forum Tool & Tooling TechnologyReplies: 1Last Post: 28-07-2009, 12:32 AM
Bookmarks