Delrin drive nut (lee)

[Jeremy]

Lee,

I don't suppose you can do 12mm x 3mm RH trapezoidal thread Delrin nuts, can you? I've had two goes now at making a tap from bits of lead screw, but both have been too soft to cut the bits of molybdenum filled Nylon I have - they end up twisting.

I also need a couple of 300mm lengths of 20mm round rail, four carriages and four support brackets, as I've decided to change the design of my Z axis.

Jeremy

[Lee Roberts]

Sending you a PM now mate :)

[Jeremy]

Thanks Lee.

Jeremy