. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 10-03-2013 #6
    Tenson's Avatar
    Lives in London, United Kingdom.
    Tenson
    Last Activity: 29-06-2021 Has been a member for 9-10 years. Has a total post count of 555. Received thanks 29 times, giving thanks to others 9 times.
    Or place a 6mm mdf sheet on top and cut through it.

    A single flute cutter will also let you run at higher RPM for the same feedrate.

    Oil the cutter I just meant squirt some WD40 on it every minute or so. Even better you could try getting one of those plant watering spray bottles where you pump the top to pressurize it. Fill it with water and 10% water soluble cutting oil (white water oil, coolant fluid etc..).
    Last edited by Tenson; 10-03-2013 at 02:04 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. eBay: 8x4 sheet of 25mm thick aluminium plate.
    By T0rnado69 in forum Items On eBay UK
    Replies: 0
    Last Post: 18-04-2014, 02:01 AM
  2. WANTED: 100mmx100mm 6mm aluminium plate/sheet.
    By Isaac in forum Items Wanted
    Replies: 11
    Last Post: 06-02-2014, 12:11 AM
  3. 10 / 15mm thick 6061 aluminium alloy sheet ?
    By rnr107 in forum Marketplace Discussion
    Replies: 10
    Last Post: 14-01-2014, 12:15 AM
  4. FOR SALE: Aluminium Tooling Sheet - Various sizes
    By Fewco in forum Items For Sale
    Replies: 4
    Last Post: 16-01-2013, 04:27 PM
  5. Need to cut .5 Aluminium Sheet - Set-up Needed
    By Andrew in forum Metal Finishing Techniques
    Replies: 15
    Last Post: 15-08-2010, 04:12 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules