. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 12-03-2013 #3
    Shinobiwan's Avatar
    Lives in Chesterfield, United Kingdom.
    Shinobiwan
    Last Activity: 18-05-2015 Has been a member for 9-10 years. Has a total post count of 293. Received thanks 22 times, giving thanks to others 25 times.
    Quote Originally Posted by Dwayne Dibbley View Post
    Question is do I just run a cable from the inside of the plug to one of the three screws on the plastic cap?
    That's exactly what I did. It'll be fine but if you want to make sure then once you've wired it up just check continuity by placing a multimeter between the spindle housing and the 4th pin.
    Last edited by Shinobiwan; 12-03-2013 at 11:38 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Chinese 300W DC spindle - is the spindle shaft grounded?
    By HankMcSpank in forum Spindles & Drive Motors
    Replies: 44
    Last Post: 26-11-2016, 07:25 PM
  2. motor and spindle cable size?
    By paulus.v in forum General Electronics
    Replies: 4
    Last Post: 04-02-2014, 10:18 PM
  3. WANTED: Chinese 1.5kw spindle/vfd
    By Philly in forum Items Wanted
    Replies: 5
    Last Post: 10-02-2013, 11:44 AM
  4. VFD Cable and 2.2kw spindle wiring
    By Flamered in forum Spindles & Drive Motors
    Replies: 7
    Last Post: 24-08-2012, 07:29 PM
  5. WANTED: Spindle holder for 1.5kw Chinese spindle.
    By jcb121 in forum Items Wanted
    Replies: 19
    Last Post: 14-10-2011, 02:07 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules