Thread: Jcb's Quad copter Project,
-
20-03-2013 #21
So I'm 3/4 of the way there!
Also how the board sits in the frame.
-
20-03-2013 #22
wow dude thats looking awesome :)
Fiction is far more plausible when wrapped around a thread of truth
Nothing great was ever achieved without enthusiasm.
Ralph Waldo Emerson
-
21-03-2013 #23
Just a few more bits and bobs to do, then I have to wait for this rain to go away :(Last edited by jcb121; 21-03-2013 at 08:16 PM.
-
21-03-2013 #24
Ergh. It is finally done-ish.
I'm missing a few nuts and bolts but the frame is done! The weight in the photo is 900g and that's with a big 5000mah battery so I've done pretty well.
-
21-03-2013 #25
I'm curious about the different colour of the props..... Do they have practical significance such as Port and Starboard?
-
21-03-2013 #26
front and back :)
-
21-03-2013 #27
-
21-03-2013 #28
-
21-03-2013 #29
Looks ace J, had to chuckle as i took delivery of two thousand of these today, bet they would be just right for this and i would have gladly popped down and given you 100 just to see it fly, live in wigan though so guess i'll have to wait for your first flight vids.
Subscribed.
.Me.Me
-
21-03-2013 #30
you can drive down if you want mate! :P
I wish I knew if it would fly or not.
full throttle means the props will spin at 13k rpm.
I've no idea if that x4 will generate enough lift. exciting times :)
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
Homemade CNC Project Help
By chaslam07 in forum Gantry/Router Machines & BuildingReplies: 1Last Post: 04-04-2012, 11:53 AM -
RFQ: Small CNC Project
By flipflop in forum Projects, Jobs & RequestsReplies: 1Last Post: 20-09-2011, 10:41 PM -
Project IceMould.
By NC-Joey in forum Gantry/Router Machines & BuildingReplies: 6Last Post: 11-08-2007, 07:00 PM
Bookmarks