Thread: Change of plans: basements
Hybrid View
-
28-03-2013 #1
It's wood throughout (or at least I can't see any metal) so I hope it's not rusty
Sounds sensible, I was just concerned about leaving something on the walls that wouldn't work with my "breathable wall" approach (hence wanting to clean back to redbrick and then limewash). Of course, "intact brick" is probably more important!
I've got some kind of 3-in-1 mould killer (Polycell or something) from a different project, I was thinking that a dose of that would be a good idea. As far as I can establish, limewash is antifungal anyway as well as allowing moisture to pass through.
Dehumidifying is part of the plan though not until the weather improves and I sort the external vent, otherwise I'll just be trying to dehumidify the street outside the house.
As an ongoing thing I was also thinking about keeping one or two of those passive dehumidifiers (glorified boxes of gypsum or similar) down there to keep on top of the moisture in the air. Does anyone have any experience with those?
-
28-03-2013 #2
Rouge if you drop some pipes down and add a couple of radiators you might find that is all you need to clear any damp up? Going for the lime wash look over the natural surface will give a nice cottage feel down there and look rather good. Still treat the walls for fungal first with stiff brush. Assuming you have neighbors then the only real problem walls will be the front and back ones. Once it is all in use i don't think you would ever notice it again.
If the nagging gets really bad......Get a bigger shed:naughty:
-
28-03-2013 #3
There is zero hope in hell that my wife will let me near the plumbing or heating (and admittedly with good reason). Plumbers don't tend to be the cheapest of people to hire so I was thinking along the lines of a small electric heater to run every now and then.
I'm not so concerned about the "cottage feel", but I reckon it will help make the place much lighter and less oppressive.
-
28-03-2013 #4
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Ignoring tool change
By dudz in forum Machine DiscussionReplies: 6Last Post: 15-02-2014, 06:34 PM -
did you change something?
By wilfy in forum General DiscussionReplies: 4Last Post: 29-12-2012, 10:58 PM -
how to change a clip art
By luke11cnc in forum Computer SoftwareReplies: 6Last Post: 03-12-2011, 12:47 PM -
NEW MEMBER: Hello and are my plans realistic?
By obsolete in forum New Member IntroductionsReplies: 2Last Post: 16-09-2011, 09:01 PM -
Most recommended plans??
By crazy horse in forum Gantry/Router Machines & BuildingReplies: 6Last Post: 03-07-2009, 02:45 PM
Bookmarks