the mystery of the wonky corners

[stirling]

4 clues... you said...

see how its rounded the edges of two of the corners but not of the other two?

only thing ive changed today is... .... and ive increased the acceleration on X

looking at both the photos X is vertical... Y is horizontal

if I put G61 at the beginning all is fine....


What you're seeing is the classic behaviour when in G64 with unequal accel on X and Y. If your accel was equal but "poor" you'd get 4 rounded corners. If equal but "good" you'd get 4 sharper corners. If you'd increased your accel on Y instead of X it would be the other two corners that rounded. The rounded corners will switch to the other 2 if you reverse cut direction. etc. etc.