-
19-03-2013 #1
Ok Im not going to hold my breath on this one but i will put it out there anyhow.
I am inviting quotes for my Z axis. There is room for change if it is needed.
These plates are 40mm plate 520mm long x 360mm Wide.
Any questions let me know
Rick
PS.. more information can be seen in my 7X4 Combo Thread but please post questions about it here or PM meAlways bear in mind that your own resolution to succeed is more important than any other - Abe Lincoln
-
20-03-2013 #2
Hi all, well ive been asked a few questions about the pockets and things. Ok the drawings i submitted above are were the concept Sketches only (although pretty complete), so here are some more complete designs to clarify things a little more.
The red shown are reference/datum surfaces only.I am also happy to provide the material for the job.
RickLast edited by Ricardoco; 20-03-2013 at 02:32 PM.
Always bear in mind that your own resolution to succeed is more important than any other - Abe Lincoln
-
20-03-2013 #3
-
20-03-2013 #4
-
20-03-2013 #5
Loving this design Ric, nice one mate!
Just as a side note as i'm following your build log over there >>>, so read the posts about the pockets for the bearing units to fit in, i.e round cutters vs square corners, what you can do is over run the corners of the pocket with the cutter in both directions, this dosnt look "great" but if done well it can and allows the corner to fit into the pocket.
.Me.Me
-
The Following User Says Thank You to Lee Roberts For This Useful Post:
-
20-03-2013 #6
Cheers Lee, I have made the pockets big enough to compensate for the corners. I will even be providing the files to do the job and if whoever is doing has V-Carve then all the better as that is what I've done it in. that's not to say I cant provide the drawings in other formats as the above drawings will show.
Whoever gets the job will get the added bonus of being able to produce some very nice Z-Axis.
RickAlways bear in mind that your own resolution to succeed is more important than any other - Abe Lincoln
-
20-03-2013 #7
Rick, how big are the backplates. mouse hover reads 1214x880 @ 60%. BTW the design looks fantastic, G.
-
The Following User Says Thank You to GEOFFREY For This Useful Post:
-
20-03-2013 #8
-
20-03-2013 #9
Says in the first post guys, "These plates are 40mm plate 520mm long x 360mm Wide."
Indeed some nice z-axis !!!
.Me.Me
-
20-03-2013 #10
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
5-axis Breakout Includes Hand-Held Control Port & 3,4,5-axis Postion-Display Port
By LoveLearn in forum General ElectronicsReplies: 12Last Post: 25-05-2013, 12:41 AM -
RFQ: Z axis and y axis carriage
By D-man in forum Projects, Jobs & RequestsReplies: 0Last Post: 08-04-2013, 10:06 AM -
NEW MEMBER: Goal - Enable 3-Axis CNC Bed Mill to Perform 5-Axis Milling
By LoveLearn in forum New Member IntroductionsReplies: 2Last Post: 25-01-2012, 08:46 PM -
Y axis is making X axis stall...!!
By fasteddy in forum Machine DiscussionReplies: 83Last Post: 24-10-2011, 12:19 PM -
Precision metal processing (3 axis, 5 axis, 7 axis) OEM
By 7AxisCNC in forum Manufacturer NewsReplies: 0Last Post: 17-05-2011, 02:04 PM
Bookmarks