. .
Page 2 of 2 FirstFirst 12

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    i2i's Avatar
    Lives in Cardiff, United Kingdom. Last Activity: 25-10-2022 Has been a member for 9-10 years. Has a total post count of 699. Received thanks 29 times, giving thanks to others 1 times.
    Click image for larger version. 

Name:	20130328_181456.jpg 
Views:	616 
Size:	351.3 KB 
ID:	8565Click image for larger version. 

Name:	20130328_181510.jpg 
Views:	549 
Size:	318.0 KB 
ID:	8566Click image for larger version. 

Name:	20130328_181525.jpg 
Views:	494 
Size:	437.2 KB 
ID:	8567Hi Asto, this is a bit strange.

    I've posted some pics of an SD2 with a CD20 next to it. The cd20 has another board in the centre of the two heatsinks which is removed to show the main board, this board has four leds on the left hand (rear) edge.

    The Denford Orac used both types of drive, the cd20 version has a higher voltage psu (around 65v-80v), and the sd2 version has a 35v ish psu.
    Last edited by i2i; 28-03-2013 at 07:30 PM.

  2. #2
    asto's Avatar
    Lives in Attica, Greece. Last Activity: 29-12-2019 Has been a member for 9-10 years. Has a total post count of 65.
    i2i...the second pic from left to right and the 4rth are pretty similar to mine almost identical but i see the white plastic socket contains three lines of contactors. Mine has two connecting the main board where the high power transistors are with the signal processing board where the logic ic's are located and the leds are on this one the one on the top. You re right!
    The first pic that i sent was borrowed from the internet not real mine...So it looks you have some point here.
    The one with the exposed PKS0320 was taken by me few days ago.
    I can send you new photos that i can have from my machine tomorrow.
    The first board though which i see must have come off a Triac mill. My Triac uses them because I can see the driver ic there covered under the flat springs. It is the L298. I had to replace this once.


    cheers
    Last edited by asto; 28-03-2013 at 08:47 PM. Reason: corrections

  3. #3
    i2i's Avatar
    Lives in Cardiff, United Kingdom. Last Activity: 25-10-2022 Has been a member for 9-10 years. Has a total post count of 699. Received thanks 29 times, giving thanks to others 1 times.
    The Triac does use the sd2 drives on the x and y axis, and an sd3 on the z axis. This is on models up to the early 90's, and then they changed them to the sd12/13 drives.
    Is your Triac one of the green ones with the open frame or a mixed white and green one?

  4. #4
    asto's Avatar
    Lives in Attica, Greece. Last Activity: 29-12-2019 Has been a member for 9-10 years. Has a total post count of 65.
    Yes right! The green one.
    But painted Grey.
    An old open machine from the 80's.

    i2i...Do you want to sell any of these boards?

    cheers

    Asto

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. Denford digiplan 300 drivers, i cant get them to run on mach 3
    By scnc in forum Motor Drivers & Controllers
    Replies: 5
    Last Post: 30-04-2014, 09:56 PM
  2. Replies: 1
    Last Post: 16-03-2014, 07:29 PM
  3. eBay: Denford Triac Parker Digiplan SD2 & SD3 Stepper Drivers
    By davidimurray in forum Items On eBay UK
    Replies: 0
    Last Post: 25-02-2013, 10:23 PM
  4. Digiplan parts left from "upgrade"
    By black5f in forum Motor Drivers & Controllers
    Replies: 1
    Last Post: 17-03-2011, 12:02 AM
  5. Parker Digiplan schematics
    By GT390 in forum General Electronics
    Replies: 1
    Last Post: 01-01-2011, 03:52 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •