Threaded View
-
27-03-2013 #13
You know Swarfing, that was a hit.
This morning I attached three wires on the board in place of removed transistor and at the other end a triple female socket. Then started playing with several types of transistors that I'd found handy and guess what... The one that made the SD2 play music again was the TIP145. So the TIP32-C is the closest equivalent as its collector current is 3Amps while the TIP145 is Ic=10Amps.
I think the supplier's location is...518, Purley Way, Croydon, CR0 4RE
Conclusion...Very few things may remain unidentified in this forum.
I am glad I've joined.
Thanks!
Ps. I wish to thank Irving as well for helping me to narrow my search_Sorry for any syntax errors.Last edited by asto; 27-03-2013 at 11:10 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Denford digiplan 300 drivers, i cant get them to run on mach 3
By scnc in forum Motor Drivers & ControllersReplies: 5Last Post: 30-04-2014, 09:56 PM -
Stepper Motor Driver - cheap similar to ArcEuro 4.2A Bi-Polar Stepper Motor Driver
By craynerd in forum Motor Drivers & ControllersReplies: 1Last Post: 16-03-2014, 07:29 PM -
eBay: Denford Triac Parker Digiplan SD2 & SD3 Stepper Drivers
By davidimurray in forum Items On eBay UKReplies: 0Last Post: 25-02-2013, 10:23 PM -
Digiplan parts left from "upgrade"
By black5f in forum Motor Drivers & ControllersReplies: 1Last Post: 17-03-2011, 12:02 AM -
Parker Digiplan schematics
By GT390 in forum General ElectronicsReplies: 1Last Post: 01-01-2011, 03:52 PM
Bookmarks