Hybrid View
-
27-03-2013 #1
Last Activity: 23-09-2017
Just checked, don't have any of these drives but do have a sack bag of stuff from a couple of Denford Starmill conversions, Need to get these on Ebay.
Also have the guts from a Roland PNC - 3100 and a Roland PNC - 2200John S -
-
27-03-2013 #2
Last Activity: 25-10-2022
Hi Asto, i'm a bit confused here. The first picture you posted shows a parker sd2 drive, but the second picture showing the component is of a parker cd20 drive.
Is the lathe an Easiturn, if so the drive should be a cd20, and to have an led showing it would seem the drive is a cd20 rather than a sd2.
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Denford digiplan 300 drivers, i cant get them to run on mach 3
By scnc in forum Motor Drivers & ControllersReplies: 5Last Post: 30-04-2014, 09:56 PM -
Stepper Motor Driver - cheap similar to ArcEuro 4.2A Bi-Polar Stepper Motor Driver
By craynerd in forum Motor Drivers & ControllersReplies: 1Last Post: 16-03-2014, 07:29 PM -
eBay: Denford Triac Parker Digiplan SD2 & SD3 Stepper Drivers
By davidimurray in forum Items On eBay UKReplies: 0Last Post: 25-02-2013, 10:23 PM -
Digiplan parts left from "upgrade"
By black5f in forum Motor Drivers & ControllersReplies: 1Last Post: 17-03-2011, 12:02 AM -
Parker Digiplan schematics
By GT390 in forum General ElectronicsReplies: 1Last Post: 01-01-2011, 03:52 PM
Bookmarks