Pks-digiplan sd2 driver IC help please

[asto]

i2i...the second pic from left to right and the 4rth are pretty similar to mine almost identical but i see the white plastic socket contains three lines of contactors. Mine has two connecting the main board where the high power transistors are with the signal processing board where the logic ic's are located and the leds are on this one the one on the top. You re right!
The first pic that i sent was borrowed from the internet not real mine...So it looks you have some point here.
The one with the exposed PKS0320 was taken by me few days ago.
I can send you new photos that i can have from my machine tomorrow.
The first board though which i see must have come off a Triac mill. My Triac uses them because I can see the driver ic there covered under the flat springs. It is the L298. I had to replace this once.


cheers