Pks-digiplan sd2 driver IC help please

[asto]

...Sorry for making you feel this way. My intentions were not even close to this.
Well, l can do more reading than writing in the future. Yes, I can do that. Besides, I am not writing in my language.

Again sorry.

kind regards

Asto.

[Swarfing]

Asto

Not sure what you apologising for? you have said nothing wrong here ;-)

[John S]

Just found some sd2 boards tonight, 3 boards, mother board and backplane off a Starmill.
machine would home and that's all, suspect something on the MB went bad as the axis all moved but gutted it and put everything new in.

Any idea what these are worth before I bung them on Ebay ?

[asto]

Images are of great help in this case. Can you post some?

cheers

[John S]

Here you are.







I have taken the top shield off one driver for the photo but they are all identical.
the mother board has all the plugs attached to the sockets with some of the cable attached so it can be colour checked.

I'm guessing the fault lay on the mother board as it would home but after that nothing.

[asto]

Here you are.







I have taken the top shield off one driver for the photo but they are all identical.
the mother board has all the plugs attached to the sockets with some of the cable attached so it can be colour checked.

I'm guessing the fault lay on the mother board as it would home but after that nothing.

Hi John-S!

It is nice I can view the images. Please tell me if your machine was modified ever. In case you are not sure please check the underside(copper side) of the mother board for non factory solder joints or wire bridges.
And, would you please make these images around 300K so I can tell if the boards are compatible with my Triac?
In case this image size is not allowed here you can use my address <[email protected]>



Thanks!

[asto]

Hi John S!

I can pay you 125 Euro for the boards because the motherboard is faulty.
If my offer is fine with you we can talk about the details. There is my email address in my previous message to you.

cheers

Asto