. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 10-04-2013 #22
    asto's Avatar
    Lives in Attica, Greece.
    asto
    Last Activity: 29-12-2019 Has been a member for 9-10 years. Has a total post count of 65.
    Quote Originally Posted by John S View Post
    Here you are.

    Click image for larger version.  Name: Parker sd2_5.jpg  Views: 245  Size: 66.8 KB  ID: 8699
    Click image for larger version.  Name: Parker sd2_4.jpg  Views: 267  Size: 138.8 KB  ID: 8700
    Click image for larger version.  Name: Parker sd2_3.jpg  Views: 256  Size: 135.5 KB  ID: 8701
    Click image for larger version.  Name: Parker sd2_2.jpg  Views: 246  Size: 148.0 KB  ID: 8702
    Click image for larger version.  Name: Parker sd2_1.jpg  Views: 258  Size: 109.0 KB  ID: 8703

    I have taken the top shield off one driver for the photo but they are all identical.
    the mother board has all the plugs attached to the sockets with some of the cable attached so it can be colour checked.

    I'm guessing the fault lay on the mother board as it would home but after that nothing.
    Hi John-S!

    It is nice I can view the images. Please tell me if your machine was modified ever. In case you are not sure please check the underside(copper side) of the mother board for non factory solder joints or wire bridges.
    And, would you please make these images around 300K so I can tell if the boards are compatible with my Triac?
    In case this image size is not allowed here you can use my address <[email protected]>



    Thanks!
    Last edited by asto; 10-04-2013 at 02:54 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Denford digiplan 300 drivers, i cant get them to run on mach 3
    By scnc in forum Motor Drivers & Controllers
    Replies: 5
    Last Post: 30-04-2014, 09:56 PM
  2. Stepper Motor Driver - cheap similar to ArcEuro 4.2A Bi-Polar Stepper Motor Driver
    By craynerd in forum Motor Drivers & Controllers
    Replies: 1
    Last Post: 16-03-2014, 07:29 PM
  3. eBay: Denford Triac Parker Digiplan SD2 & SD3 Stepper Drivers
    By davidimurray in forum Items On eBay UK
    Replies: 0
    Last Post: 25-02-2013, 10:23 PM
  4. Digiplan parts left from "upgrade"
    By black5f in forum Motor Drivers & Controllers
    Replies: 1
    Last Post: 17-03-2011, 12:02 AM
  5. Parker Digiplan schematics
    By GT390 in forum General Electronics
    Replies: 1
    Last Post: 01-01-2011, 03:52 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules