Gnashing 127 teeth

[BillTodd]

Thanks Jon/John

I hope to use all Myford gears for the change wheels (I have no Hardinge gears). I'll have to make a suitable banjo. A chap from the Practical Mechinist forum has very kindly emailed some 3d models of the original banjo. I've just got to work out the sizes of the Myford gears.

[John S]

If you need any 20 tooth wheels take a look at these.

http://www.metoolsonline.com/product...products_id=54

Made from steel not cast iron and have a modified tooth form to give a stronger tooth.

John S.