Quote Originally Posted by John S View Post
Mach setup looks OK

Pics don't really show anything.

010.jpg is the best shot, I'm looking for dip switches that set microstepping. X and Y should be the same if the screws are the same and the motors are both direct drive.

On the picture of the circles, is the wide diameter X or Y ?

If it's X change the steps per on Y from 400 to 200
If it's Y then change X from 400 to 200 and run the file again.

Remember to click save settings, then OK and reboot.

Off to bed now, it's half past dark here, can you play quietly with yourself until morning ?
Def no dip switches anywhere, I'll have a muck about with changing the steps and see what happens and post results - and I never play quietly, the volume is always set to 11