Thread: Upgrade? Chinese CNC Machine
Hybrid View
-
03-04-2013 #1
Last Activity: 10-09-2013
100 on the Y 105 on the X - I know this'll all go way over my head but how do work it out?
Originally Posted by Ricardoco
Cheers
Carl
-----------------------------------------------------------------
Cardiff City Supporter ~ Real Sporting de Gijon Supporter ~ Vintage Synthesizer Collector
La gente dice que tu vida esta planeado, me gustaría encontrarse con el jefe de planificacion para que yo pudiera darle un punetazo en la cara!
-
03-04-2013 #2
Last Activity: 08-09-2018
Surely that is an 1/8" cutter?so your cutter is a 3mm cutter?If the nagging gets really bad......Get a bigger shed:naughty:
-
03-04-2013 #3
Last Activity: 23-01-2017
It may well be. Originally Posted by Swarfing
Always bear in mind that your own resolution to succeed is more important than any other - Abe Lincoln
-
03-04-2013 #4
Last Activity: 08-09-2018
Are we actually sure these are metric screws? did they kick you a machine built for our American cousins and give you one with imperial screws?
If the nagging gets really bad......Get a bigger shed:naughty:
-
03-04-2013 #5
Last Activity: 23-01-2017
Im not sure what they are but something is not right but then when its cutting a circle we can get him to look a bit deeper into it.. I do however suspect you may be correct at least in some part.. Originally Posted by Swarfing
RickAlways bear in mind that your own resolution to succeed is more important than any other - Abe Lincoln
-
03-04-2013 #6
Last Activity: 10-09-2013
No idea, it came with a 220v PSU not that that means diddly squat - so if I tear it down to the point I can reach the screws how do you do measurements, the same as measuring the pitch on a normal screw? Originally Posted by Swarfing
Cheers
Carl
-----------------------------------------------------------------
Cardiff City Supporter ~ Real Sporting de Gijon Supporter ~ Vintage Synthesizer Collector
La gente dice que tu vida esta planeado, me gustaría encontrarse con el jefe de planificacion para que yo pudiera darle un punetazo en la cara!
-
03-04-2013 #7
Last Activity: 23-01-2017
Ok divide 200 ~ (the 'steps-per' that is set on the axis in motor tuning) by the cut measurement minus the cutter measurement(Dia 3mm as the software is running in metric mode 0r 1/8" if you require brain drain ), and then multiply by the measurement you told it to cut which was 100mm.. Originally Posted by Carlb1058
RickLast edited by Ricardoco; 03-04-2013 at 01:12 AM.
Always bear in mind that your own resolution to succeed is more important than any other - Abe Lincoln
-
03-04-2013 #8
Last Activity: 10-09-2013
I get 1500.68 Originally Posted by Ricardoco
methinks I did summut wrong
Cheers
Carl
-----------------------------------------------------------------
Cardiff City Supporter ~ Real Sporting de Gijon Supporter ~ Vintage Synthesizer Collector
La gente dice que tu vida esta planeado, me gustaría encontrarse con el jefe de planificacion para que yo pudiera darle un punetazo en la cara!
-
03-04-2013 #9
Last Activity: 08-09-2018
Carl measure the pitch of the leadscrews
If the nagging gets really bad......Get a bigger shed:naughty:
-
03-04-2013 #10
Last Activity: 23-01-2017
why not just follow 1 path at a time then the chap wont get too confused.. Originally Posted by Swarfing
RickAlways bear in mind that your own resolution to succeed is more important than any other - Abe Lincoln
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Yet another Chinese 3020 CNC upgrade thread!
By Pointy in forum Machine DiscussionReplies: 31Last Post: 18-02-2014, 01:04 PM -
A decent little (PCB miilling) Chinese machine...
By HankMcSpank in forum Machine DiscussionReplies: 5Last Post: 18-06-2013, 06:59 PM -
Chinese CNC machine modifications - Discussion
By craigrobbo in forum Milling Machines, Builds & ConversionsReplies: 2Last Post: 14-05-2012, 06:51 PM -
Electronics upgrade for an existing machine.
By Shinobiwan in forum Electronic Project BuildingReplies: 9Last Post: 18-03-2012, 04:01 PM -
Chinese CNC machine...whatchathink?
By HankMcSpank in forum Chinese MachinesReplies: 21Last Post: 11-04-2011, 05:21 PM
Bookmarks