complete beginner saying hi

[GEOFFREY]

Hi Helder, wellcome to the site. I know you will get lots of help here if you decide to build your own cnc machine. the dumb ones are those who don't ask questions. Good luck. G.

[martin54]

Welcome to the forum, if you want to learn then a good place to start would be to read through some of the build logs, they contain lots of useful information which will probably answer a lot of the questions you may have.

[manofgresley]

Hi and welcome

I to was a complete beginner until i joined this site, now i am learning fast.

Enjoy.

Ray

[helder1977]

thanks all for the kind welcome
this is all so confusing it looks like the deeper i get the worse it get lol

but ill get there


i was thinking of getting something to mill plastic sheet could i do that with with something cheap like this CNC ROUTER ENGRAVER MACHINE DRILLING / MILLING 3020 m8 | eBay

not that im buying just looking

[Fivetide]

Hello welcome to the madness Lee created .. :)

[Carlb1058]

thanks all for the kind welcome
this is all so confusing it looks like the deeper i get the worse it get lol

but ill get there


i was thinking of getting something to mill plastic sheet could i do that with with something cheap like this CNC ROUTER ENGRAVER MACHINE DRILLING / MILLING 3020 m8 | eBay


not that im buying just looking

Hi and welcome and with a bitta muckin about, yes you could. By muckin about, most of it is getting the thing a) put together properly and b) RTFM I bought the 3040 mainly for the additional size, they're not too bad but don't expect great electrics, I've managed to get mine to finally work, but the controller lets it down so I'll be upgrading that, following which will be a larger home made table - once you start you get addicted for want of a better Oh and ask questions, I did and they're a great bunch on here only ready to lend a hand!!