. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 07-04-2013 #3
    Carlb1058's Avatar
    Lives in Sydney (Ex-Cardiff), Australia.
    Carlb1058
    Last Activity: 10-09-2013 Has been a member for 9-10 years. Has a total post count of 77. Received thanks 1 times, giving thanks to others 3 times.
    Quote Originally Posted by Jonathan View Post
    When the probe touches, the digitise input is on, so that's fine. The only thing I don't like in that screenshot is their spelling of digitise!
    The fact you get different results each time the tool touches implies you might have a problem with interference. How is the probe connected and are you using shielded cable?

    Also, U notice you have the kernel frequency set to 35kHz. Are you sure it needs to be that high, as Mach3 is likely to be more stable if you run it on 25kHz. I doubt that's causing any problems with the probe.
    35KHz is manufacturers specs but hey it's a strange machine ;)
    The probe is connected to a connection (logical place for it) on the back of the controller box, as for the spelling, if you look at Mach3 it's got spelling errors everywhere
    Last edited by Carlb1058; 07-04-2013 at 01:04 PM.
    Cheers
    Carl

    -----------------------------------------------------------------
    Cardiff City Supporter ~ Real Sporting de Gijon Supporter ~ Vintage Synthesizer Collector
    La gente dice que tu vida esta planeado, me gustaría encontrarse con el jefe de planificacion para que yo pudiera darle un punetazo en la cara!
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Semi - Experienced / Experienced CNC Turner required in Rutland
    By ChrisMunday in forum Opportunities Available & Sought
    Replies: 0
    Last Post: 05-02-2014, 11:08 AM
  2. Experienced CNC Millers Needed
    By Sallyanne in forum Opportunities Available & Sought
    Replies: 0
    Last Post: 20-08-2013, 10:47 AM
  3. need an experienced eye to cast a look over this driver
    By DrNik in forum General Electronics
    Replies: 17
    Last Post: 17-08-2013, 10:52 PM
  4. Experienced CNC Miller Required in Weymouth
    By Andy@Alecto_Recruitment in forum Opportunities Available & Sought
    Replies: 0
    Last Post: 12-12-2012, 02:42 PM
  5. experienced CNC programmer/operator needed
    By cyboermedic in forum Opportunities Available & Sought
    Replies: 0
    Last Post: 25-10-2012, 08:05 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules