Selling all my 2mt x 1.2mt CNC router bits...

[IanS1]

2 x 25mm ballscrews (machined to fit nema 34 mounts)
2 x 25mm ballnuts
2 x nema 34 mounts
2 x nema 34 motors (4 wire 6N motors)
70v PSU and two drivers for the nema 34's..

I will get specs and serial numbers etc later today or tomorrow...
As I mentioned, I am scaling down so these will be up for sale or swap..

Any more info needed, just ask!

Steve...

Hi Steve,

Might be interested in the NEMA 34 stuff if you can get some specs/details on the motors/drivers etc.

**EDIT** How long are the 25mm screws?

Cheers
Ian

[fasteddy]

Hi all again..

Wow, did not expect such an enthusiastic response..
I have my hands full with kids today, will supply all specs by tomorrow morning for you all.. Have had several messages asking me for a price for the lot, I will also work this out for you all too..
If any of you are up-sizing, I will be interested in a swap for a smaller machine/or parts...

25mm ballscrews are 2mts usable thread + machined ends (10mm pitch)
16mm ballscrew is 1.4mts usable thread + machined ends.. (10mm pitch)

I have not included all the z axis bits yet so the list is quite incomplete, really need an hour or two to catalogue what I have, and the kids are not giving time to draw breath today..!

Bear with me until tomorrow and I will have all info on everything...

Steve..

[Jonathan]

I'm interested in (in order of preference):
2200mm 25mm ballscrews, with matching nuts
70V PSU, and maybe the drivers.
16mm ballscrew with nut

I wouldn't want the bearing mounts for either ballscrew. Is 2200mm the length including end machining and is it just the standard end machining? Let me know if you don't sell it all together. If I get them I'll sell my two used 2094mm RM2510 screws and rotating ballnut assemblies, with new nuts.

What are you after if swapping? I might have some bits you could use...

[fasteddy]

Hi Jonathon..

Long time no speak/text/email etc..
Will measure them to be sure but they should (ballscrews) be 2.2mts + machined ends..
The PSU is the one I got from you..!

As mentioned, I would like a few days to see if anyone wants to take the lot as a package, but if not, I will sort out a price for you..
As for parts that I want, well, I plan on making a 300-400mm desktop machine so anything that is appropriate for that would be of interest.. The above stuff that I have is way to large scale to use for this project.. If I remember correctly, you have a workshop and are able to machine ally? Maybe we could do some sort of barter..?

Steve...

[Jonathan]

The PSU is the one I got from you..!

I'd forgotten about that...

How strange.. My ballscrews are just about 2094mm + the machined end... Do we shop at the same stores..?

That's a shame - I'd only gain a small amount by the time I've altered the end machining to have a thread on both ends, so it's probably not worth it for me. My current screws are 2094mm including end machining and they were from linearmotionbearings2008 on eBay.

I plan on making a 300-400mm desktop machine so anything that is appropriate for that would be of interest.. The above stuff that I have is way to large scale to use for this project.. If I remember correctly, you have a workshop and are able to machine ally? Maybe we could do some sort of barter..?

Possibly, I'll wait and see...

[fasteddy]

Hi Jonathon..

How strange.. My ballscrews are just about 2094mm + the machined end... Do we shop at the same stores..?

Steve...