Selling all my 2mt x 1.2mt CNC router bits...

[fasteddy]

Hi Jonathon..

Long time no speak/text/email etc..
Will measure them to be sure but they should (ballscrews) be 2.2mts + machined ends..
The PSU is the one I got from you..!

As mentioned, I would like a few days to see if anyone wants to take the lot as a package, but if not, I will sort out a price for you..
As for parts that I want, well, I plan on making a 300-400mm desktop machine so anything that is appropriate for that would be of interest.. The above stuff that I have is way to large scale to use for this project.. If I remember correctly, you have a workshop and are able to machine ally? Maybe we could do some sort of barter..?

Steve...

[Jonathan]

The PSU is the one I got from you..!

I'd forgotten about that...

How strange.. My ballscrews are just about 2094mm + the machined end... Do we shop at the same stores..?

That's a shame - I'd only gain a small amount by the time I've altered the end machining to have a thread on both ends, so it's probably not worth it for me. My current screws are 2094mm including end machining and they were from linearmotionbearings2008 on eBay.

I plan on making a 300-400mm desktop machine so anything that is appropriate for that would be of interest.. The above stuff that I have is way to large scale to use for this project.. If I remember correctly, you have a workshop and are able to machine ally? Maybe we could do some sort of barter..?

Possibly, I'll wait and see...