1/8" or 3mm Single flute carbide cutters

[craigrobbo]

What flute length do you need?

The material I am cutting is 10mm thick so flute length of 10mm or more - Anything longer than 10mm is a bonus really.

Thank you

[ptjw7uk]

Toolstation has some 1/8 with 1.4 shaft Toolstation > Power Tool Accessories > Router Bits > Router Bit Straight Imperial
Peter

[uppy121]

thank you ptjw7uk just put a order in for 10 thanks uppy121

[Jonathan]

thank you ptjw7uk just put a order in for 10 thanks uppy121

There should be one of their shops near you?

Dow, missed that one... I've got a few of those you could have had as since I started using single flute cutters I've not touched the standard router cutters. You need to be careful with the ones from toolstation. They can work well, but they do break easily if you get the feedrate wrong.

[ptjw7uk]

The toolstation ones are not that good but they cheap enough to learn on!

Peter