IMO JAGUAR VFD help needed

[asto]

CUB - Drives Direct
http://www.drivesdirect.co.uk/Downlo...B%20Manual.pdf

this is the manual i had with my imo vfd

Thanks Irving!
Though mine is VC150.
Swarfing there must be some problem with this link. Could not open the Pdf.

[Swarfing]

Asto should not make a lot of difference, most of the connections and settings are the same across a lot of the different models. You have enough manuals here now to what you need. the only difference will be the frequency settings for the speed control which won't be hard to deal with. Post a pic of the one you have.

Also i think the VC150 = Cub 1.5 amp version

[asto]

Sure i will do that tomorrow

Thank you all

regards

[irving2008]

@swarfing Exactly so, I thought the Cub is the VC150 (except its not 1.5A but 1.5kW (2HP) LOL), IMO branded differently for different markets...

[Swarfing]

Yes it is the 1.5kw Irving looking again. all config is the same as far as i can see on them all.

Paul

[asto]

Yes it is the 1.5kw Irving looking again. all config is the same as far as i can see on them all.

Paul

I hope these IMO images have a lot to say.
The schematic came out of the Parajust manual. The pdf extracts are for the Parajust
As you all see, control impendance is double in the IMO as Parajust needs 5K pot in order to bring the motor to full stop.

[Swarfing]

Ok this is much older than what we have been looking at. But you have all the information to connect this up so don't understand your problem with it Asto? Swap the potentiometer out for a 10k one