Let The Fun Begain, New build on the Table.

[Bush Flyer]

There was nothing in the instructions from cnc4you about shielding, I now need help, do you shield just the wires to the stepper motor, or do you shield the stepper motor wires from the limit switch wiring.
What a mess there is over £70 of wiring there including the plugs.
And here was me thing I was smart keeping all the wiring neat and tidy, Now how do I fix this. Do I let the wires loose is this good enough just leave them loose in a cable track or can you get screening to fit around the cable on the out side of the insulation on the power wiring and of course you need to earth shielding do you earth the shield at one end or both.( On google search I found some mesh but was £30 for 5 metres and you get Tin-Plated Copper Foil Shielding Tape from 3M its about the same price what would you use or is there something better?) Will I have to rewire the inside of the control box or is it just the wiring to the stepper motors and the limit switch's?
On another search I found Guitar Pickup copper foil tape would this work and do I shield each of the four wires from the stepper motor separate?