New Autoleveling PCB software

[gururise]

Daedelus,

Thanks for the autoleveling software! Couple of thoughts:

• Its great that you used Java, as it lets me run it on my Linux box.
• Also, would it be possible to calculate the board x & y dimensions from the input g-code itself, rather than have the user enter those values?

I decided to test out the v0.5 release you have on your website:
I tested it with a very simple board (gcode file) I've created from Eagle v6.4 & pcb-gcode 3.6.0.4 (latest release); however, after loading the leveled gcode into EMC2 (linuxCNC v2.5), I get an "attempt to divide by zero" error message at line 7604 and I'm unable to continue. I've attached the original gcode & the leveled gcode in the attached zip file. Do you know what i'm doing wrong? I set the x/y coordinates to 0, and entered the x dim as 36.7 & the y dim as 20.1

Also, in your previous posts, you mentioned new versions of your autoleveling software; however, on your website I've only been able to find v0.5. Do you have a location where you are uploading the latest releases?

Thanks once again for the great software!