We are Bearing Station: Ask us anything!

**WandrinAndy** · 20-04-2013

Easy question to start with Phil........ Should we prepare for a BBQ summer?

Welcome to the forum btw.

Andy

**BearingStationPhil** · 20-04-2013

Originally Posted by WandrinAndy

Easy question to start with Phil........ Should we prepare for a BBQ summer?

Welcome to the forum btw.

Andy

Hmmm . Yes you should always be prepared . Buy the meat now deep freeze . I always ensure I have beer available for those hastily arranged bbqs

**gavztheouch** · 21-04-2013

Welcome Bearingstation I was wondering if you could shed any light on the answer to life the universe and everything?

Alternatively do you recommend gluing aluminium pulley to the shafts of stepper motors with strong loctite?

**BearingStationPhil** · 22-04-2013

Originally Posted by gavztheouch

Welcome Bearingstation I was wondering if you could shed any light on the answer to life the universe and everything?

Alternatively do you recommend gluing aluminium pulley to the shafts of stepper motors with strong loctite?

Hello. If you were going to use an adhesive i would recommend Bondloc B415X20GRM which is the same as loctite only cheaper. Normally you would also have a grub screw with the shaft nipped to locate the pulley to ensure a secure grip. The only other thing to consider is the speed and temperature which could have an effect on any bond. I have attached a data sheet or linked anyway for you to check out the adhesive Bondloc manufacturer of Industrial Adhesives and Sealants

Meaning of life easy. Its 42.

Phil