Gents,

thinking of getting this combo:

Leadshine ACS806 servo - ACM604V60 Brushless Servo Motor - Leadshine Technology Co., Ltd.
Leadshine ACM604V60 driver - ACS806 Brushless Servo Drive - Leadshine Technology Co., Ltd.

not sure on the PSU. Looking at the specs, servo can go up to 25A peak current, driver can do 18A peak current, so there's a rather big discrepancy there, but those two are suggested by Leadshine as a kit, so I'm assuming (yup, assumption, the mother of all f*ck ups) it's going to work. What I can't find is a suitable PSU for this lot, everything I keep finding is too low on current or I'm calculating something wrong. Servo is 60VDC nominal voltage, peak current 25A, that gives 1.5kW :O is that what I need for the PSU or am I going bonkers?

Regards,
dsc.