Power Supplies

[GTJim]

Thanks for the replys.

M_C
If the offer is still available regarding the power supply I would be interested. Just PM me to let me know what you want.

How would you go about making a PCB to suit the components for the power supply?

[martin54]

I wouldn't know where to start making a PCB, I just soldered the bits together & then mounted them to a bit of 5mm board with double sided tape so it looked tidy.

[m_c]

You don't need a PCB when using a torroid, as eveything is either screw or spade terminals.
Torroid is held on with a bolt and has loose wires for connection, bridge rectifier is bolt mounted with spade terminals, and capacitor has a bolt down clamp with either screw or spade connectors.

I'll drop you a PM in a bit.