Threaded View
-
26-04-2013 #1
It's now looking like I'll need to source some of these in number, not even sure what it would be called (presently I refer to it as 'a small bit of rectangular 1.6mm thick steel'! - not that catchy - would there be a more appropriate name as used int he industry?)...
If I know how it would be made, then I know who to approach.
Spec is ....1.6mm thick mild steel, about 33mm(ish) x 4mm (I'll also need some about 20mm x 4mm)
From what I can gather....laser cutting is out (deformation?), water jet cutting is a possibility but would probably need tabs...else the part falls into the water tank below! (which means a bit of a hassle tarting up the de-tabbed part) ....could something like this be stamped/pressed out of 1.6mm sheet? (sorry if this is a naive question....but this is all a brave new world to me!)
Ideas on the back of a postcard please!Last edited by HankMcSpank; 26-04-2013 at 10:34 AM.
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
Milling mild steel
By dudz in forum Machine DiscussionReplies: 33Last Post: 16-02-2014, 02:31 PM -
RFQ: Several mild steel parts
By dudz in forum Projects, Jobs & RequestsReplies: 6Last Post: 26-08-2013, 11:37 AM -
Cutting 1.6mm mild steel with a CNC machine?
By HankMcSpank in forum Machine DiscussionReplies: 4Last Post: 01-05-2012, 09:56 PM -
Homemade desktop CNC - cutting 0.8mm mild steel out the question?
By HankMcSpank in forum General DiscussionReplies: 7Last Post: 16-04-2010, 09:37 AM -
Where to get 1/8" sheet mild steel laser/water jet cut?
By HankMcSpank in forum Marketplace DiscussionReplies: 28Last Post: 10-02-2010, 01:28 AM
Bookmarks