. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 12-05-2013 #6
    HankMcSpank's Avatar
    Lives in London, United Kingdom.
    HankMcSpank
    Last Activity: 10-06-2024 Has been a member for 9-10 years. Has a total post count of 623. Received thanks 10 times, giving thanks to others 59 times.
    Aahh...I see - I use nice flat acrylic as spoiler backing board with double sided tape, the acrylic gets thrown....



    (btw the green wire is my auto Z zero sensor wire to my CNC board..the right hand side clamping strip is conductive & makes contact with the FR4 copper surface. The tool is grounded...therefore when the tool touches to copper FR4 surface, the CNC-USB software knows it's exactly Z0)

    ....but only after I've used both sides! (I don't need totally flat because CNC-USB software probes the Z plane prior to V cutting)
    Last edited by HankMcSpank; 12-05-2013 at 12:46 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. What tooling to drill lots of 10mm holes 45mm deep?
    By AlanMJackson in forum Tool & Tooling Technology
    Replies: 24
    Last Post: 13-01-2014, 08:53 PM
  2. Drill 4 x 28mm holes through 44mm thick aluminium
    By WandrinAndy in forum Gantry/Router Machines & Building
    Replies: 10
    Last Post: 30-09-2012, 09:17 AM
  3. Now if only someone invented a drill that drilled square holes.....
    By HankMcSpank in forum General Discussion
    Replies: 3
    Last Post: 20-10-2011, 10:07 PM
  4. Drilling force monitering/chipped drill detection/1000's of holes in SS
    By PatK in forum Tool & Tooling Technology
    Replies: 3
    Last Post: 27-09-2011, 11:57 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules