Threaded View
-
14-05-2013 #11
These pics show the baffle plate, the vac hose adapter and the swirl nozzle. from the CPC ash can I didn't use the filter and the original vac connector. The handle holes were used for fixing the baffle plate to the lid. This meant I did not have to drill or cut the original ash can at all.
So the whole thing cost me £10.75 for the ash can (free delivery) and the rest I had :- a couple of bits of scrap mdf, a piece of 60mm nylon rod, 200mm of 32mm waste pipe and a bend, 4 washers, 6 25x 4mm socket caps and 6 improvised t-nuts (riv-nuts backwards).
I just hope that the device works properly, preliminary tests are promising
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Open Source Dust Shoe Designs
By Tomnewry in forum Open Source Designs & PlansReplies: 22Last Post: 30-06-2014, 01:51 PM -
Dust Shoe Deisgn
By m.marino in forum Open Source Designs & PlansReplies: 0Last Post: 01-08-2013, 12:19 PM -
cheap dust collection solution?
By MikeyC38 in forum Machine DiscussionReplies: 5Last Post: 01-12-2012, 05:22 PM -
Workshop dust extraction...help!
By Jonathan in forum Machine DiscussionReplies: 8Last Post: 03-01-2011, 07:54 PM -
Dust collection! Cough!
By Tom in forum Dust Extraction & CollectionReplies: 15Last Post: 04-08-2010, 10:43 PM
Bookmarks