Any Injection Moulders on here, before I buy Chinese ?

[Bazzer]

Just registered to ask something else and spotted this. I do 3D printing in PLA, ABS and Nylon - happy to try and print a part for you if you want - (free, no cost) to see if it can be done.

hi Chaz - Thanks for your kind offer, but if I am correct the material cost alone would be over a fiver each at 60g. Still if you fancy making a few thousand let me know
I do have some of these items, just looking for new supplier.

Thanks
Simon

[irving2008]

hi Chaz - Thanks for your kind offer, but if I am correct the material cost alone would be over a fiver each at 60g. Still if you fancy making a few thousand let me know
I do have some of these items, just looking for new supplier.

Thanks
Simon

Robin was restoring an injection moulding machine so he could make his own parts as quality from China IIRC was getting worse.

Not sure where he is with it...

http://www.mycncuk.com/forums/tool-t...n-moulder.html
http://www.mycncuk.com/forums/softwa...ng-manual.html

[Chaz]

hi Chaz - Thanks for your kind offer, but if I am correct the material cost alone would be over a fiver each at 60g. Still if you fancy making a few thousand let me know
I do have some of these items, just looking for new supplier.

Thanks
Simon

A few thousand ... ok then. Send me the file if you can - my curiosity and Ill cost it up :-) (and see if its something that can be printed).

[martin54]

A few thousand ... ok then. Send me the file if you can - my curiosity and Ill cost it up :-) (and see if its something that can be printed).

Wasting your time Chaz if you are running a business, on the volume that Bazzer wants you shouldn't be able to get close in price if your charging properly, material costs will be higher, filament v pellets & it will take far more time for the job as well, once the mold is made an injection molding machine will spit out 1000 of these in no time.
Only reason I mentioned printing to start with was because I thought Bazzer was looking for a one off which would make injection molding very expensive with the cost of a mold.
On small quantities & prototyping then yes printing is probably far cheaper than injection molding but not on large volumes.

[Chaz]

Wasting your time Chaz if you are running a business, on the volume that Bazzer wants you shouldn't be able to get close in price if your charging properly, material costs will be higher, filament v pellets & it will take far more time for the job as well, once the mold is made an injection molding machine will spit out 1000 of these in no time.
Only reason I mentioned printing to start with was because I thought Bazzer was looking for a one off which would make injection molding very expensive with the cost of a mold.
On small quantities & prototyping then yes printing is probably far cheaper than injection molding but not on large volumes.

Agreed, I just wanted to see how well I could make the part. Ive seen what it is - not complex but yes, unlikely to print 1000's even on my larger CM1 'el monstro' printer ...