Introducing myself

[martin54]

If you are looking at a production environment for machining aluminium then a cress may not be your best option but for occasional use they seem to be ok as the video shows. Not used one myself so can't speak from personal experience.

[Chaz]

Thanks - its just a starting point - will check to see whats available once I am ready to buy.

So, taking a bash at my own design. Nothing special - keeping to basics - using this CNC as inspiration - will cost it all up and see what it will cost. Welcome to comment / crit etc. Inspiration from here (ie, this is what I am trying to copy). http://www.mycncuk.com/forums/router...ade-cnc-4.html

http://farm9.staticflickr.com/8395/8...a6a95de7_b.jpg

Thanks
Attachment 8956

The bed is 120 x 30 profile, 1 meter long and 4 x 120 width. The other section is 120 x 60 profile - 480mm across and 200mm shorter segments for the sides. Of course still a load to do and look at.