Major issue with snapping to circles -Autocad 2013

[Clive S]

Have you checked the settings in osnap I only have autocad 2004 and the tabs are along the bottom you have to right click on them to get to settings also you might have grid snap on hope this helps ..Clive

[craigrobbo]

Have a look at this, I posted here too - May help to explain a little better.

Major issue with snapping to circles. - Autodesk Discussion Groups

[Clive S]

I'me sorry I could not open that file in my copy of autocad but perhaps could with a dxf file. ...Clive