Thanks for the advice Martin and Ross.

I have made a start on some designs after reading through a heap of build logs. Seems that for my size of machine I would be pushing the budget too far to get HIWIN 15mm rails on all the axis. Perhaps I will have to have HIWIN on the Z and build in some upgrade paths for HIWIN on X and Y in the future if I find the machine needs it.

Also thanks for the info on welding problems in regards of accuracy. I think I should be aiming for something similar to this one, in particular JAZZCNC's machines in the second post of this thread http://www.mycncuk.com/forums/diy-cn...ign-build.html

The info on the screws is useful too. I hadn't anticipated the torque required for aluminium, I was worried about whipping. Speed is of secondary concern after the accuracy. I would rather run for 10hrs and be accurate than 5hrs and be sloppy. I will design with pulleys so I can have a bit of choice over it.

I am having trouble finding Aluminium profile with prices listed to get a feel for what is affordable. Are there any preferred suppliers? I need to get a feel for how much I can expect to spend to help with design choices.

Thanks.
Tom.