. .
  1. #1
    hello, I do realise it IS a complete liberty having your first post as a for sale but read on please.

    I just bought an enclosure, cnc / liquid gasket printer, for the desktop Isel Techno FB2 that was inside.
    so I am offering all the bits that I don't require, but I do want new motors and controllers, mach3/4 and that, anyways here goes

    here is what I bought, took two goes in my little estate car, Fulham London to Stafford, but at least now it is all in bits


    the long side are 90 by 45 = 1450mm
    there are six bits
    -----------------------
    the short sides are 1080mm
    there are 6 bits of this - maybe 8
    --------------------------
    the legs are 90mm by 90mm and have bolt in feet
    ------------------------------------
    there are 4 complete blue panels, for all 4 sides
    the buttons on the front could be for auto stop
    -----------------------------------------

    if you left it as it is, max width is 1080 plu 90 plus 90 = 1260mm, 4ftand a smidgers
    the long then is 1450 plus 90 - leaving the tall legs = 1540mm, 1525 is 5ft

    -------------------------------------------
    theer are 2 bits of 90 by 45 to make the y axis with, i think another few lengths to make a shelf on the tall legs, and the z axis

    -------------------------------------------

    there are 2 3/4'' 19mm solid alloy plates to make the gantry ends, there are another two bits of 15mm or 19mm to make the z axis

    -------------------------------------------

    there are 4 four foot flat sliders with bosch bearings, enough to then do the y axis and loads to make a very rigid z axis.
    these are fitted to 4 bits of 60 by 45mm -
    THERE ARE ALSO A PAIR OF IAR RAMS AND 2 PUMPS AND LOTS OF PNEUMATIC CONTROLLING STUFF - I DON'T KNOW WHAT IT DOES THOUGH.

    there are two of those alloy thick plates with a nice hole in the centre for you to cut a pair of welly boots from, and have the nice radius


    ----------------------------------------------
    also there is stack and stacks of 45mm box, lots of nuts and bolts

    all the wireing is there to the controllers about 1998 from what I can see, I can take a pic.

    ------------------------------------------------

    there are 2 old wee amc 3 axis controllers, , two hand held doofers, all the wireing and connectors

    all used

    IT IS ALL APART, YOU CAN GET IT IN AN ESTATE CAR

    I AM WILLING TO POST EVERYTHING - BAR THE BLUE SIDES AT COST.

    NOW THE BEST BIT i NEED
    http://www.cnc4you.co.uk/index.php?r...product_id=217
    ALSO NEED A SPINDLE AND MOUNT
    AND SOME MACH3 - OR 4
    OH AND A USB/lan BOB

    SO HAPPY TO HAVE A SWAPSIES.
    THANKS
    Last edited by nobby; 10-06-2013 at 04:41 PM.

  2. #2
    do you have the complete router? if so would you be interested in a swap for an isel router with gallad software ??
    john 07817 200279

  3. #3
    its all gone, I am keeping the fb2 as its now got new 76mm 3.1 motors and new usb bob and drives and mach 3 and sheetcam, and a new custom mounted makita 700 watt motor trimmer router motor.
    and its lush.

    i am interested in your isel if its an fb2.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FOR SALE: large aliminium modular table £350
    By nobby in forum Items For Sale
    Replies: 0
    Last Post: 31-01-2014, 05:19 PM
  2. Replies: 3
    Last Post: 25-06-2013, 08:30 AM
  3. EXPERIENCE: Dont Use Modular CNC Technology!
    By leaveme in forum Trading Experience & Feedback
    Replies: 0
    Last Post: 14-09-2010, 05:44 AM
  4. Linear sliders
    By gorbo in forum Gantry/Router Machines & Building
    Replies: 5
    Last Post: 17-08-2010, 07:20 PM
  5. NEW MEMBER: Hello from Modular CNC
    By ModularCNC in forum New Member Introductions
    Replies: 1
    Last Post: 21-11-2009, 02:30 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •